16 Power Sweep
Tailback takes the snap wide around end with the wingback and pulling guards leading outside.
Concept: Wingback and both guards pull to escort the runner around the corner, kicking out the contain defender.
Grows with your players
Same play, more layers as they age up — teach it once and build on it every season for a consistent program.
- 8UIntroduce: Nail the snap/exchange, aim the right hole, and finish downhill.
- 10UAdd the lead: Add the pulling guard(s) leading through the hole.
- 12UAdd the edge: Add the kickout block and run it to both sides.
- 14UMaster it: Run it fast both directions and check into it by defensive look.
Every position's job
Take the direct snap, get width around end, and follow the wingback and pulling guards.
Fill or fake inside to hold the linebackers, or lead around the edge.
Pull and kick out the contain defender at the corner to turn the runner up.
Lead-block around the edge or seal the pursuit.
Reach or block down to seal the inside edge.
Down-block the first inside defender to wall off pursuit.
Pull and lead around the corner ahead of the tailback.
Pull behind and wrap upfield to block the alley defender.
Snap to the tailback, then block back on the backside.
Hinge and cut off backside pursuit.
How to teach it
- 1Three blockers escort the sweep — wingback and both guards must get to the corner fast.
- 2Tailback gains width first, then turns north off the kickout block.
- 3Time the pulls so the guards arrive at the corner ahead of the back.
Common mistakes to fix
- !Tailback turns up too soon — fix by stressing width before the cut.
- !Guards are late to the corner — fix with a timed race to the edge landmark.
Build this into your call sheet.
Adopt this system in your coach portal, tag plays by situation, and print call sheets and player wristbands.